Product composition and usage: It is an oil modified alkyd based primer suitably pigmented with micro fine pigments and extenders. It is a white primer ideal for plaster surfaces and can be used on wooden and ferrous metallic surfaces.
USP Best for masonry and asbestos surfaces. It is free from any heavy metals like lead, mercury and chromium. It is an alkali resistant primer.
Safety features: Flammable
DIRECTIONS FOR USE
Surface preparation: Ensure that the surface is free from dust, dirt, loose particles and moisture. Wipe clean with Mineral Turpentine Oil (MTO) and make sure the surface is dry fully. One or two coats of primer can be used depending on the requirement. For best results, it is advisable to give 10-12 hours drying time before application of subsequent coats Do not over thin. Stir well before use
Application procedure Apply one coat of BP Frimer (ST) after diluting properly and straining through a clean steve Apply it on the substrate by brush or spray Check the recommended viscosity of the primer to suit brushing/spraying.